Showing posts with label food storage. Show all posts
Showing posts with label food storage. Show all posts

Wednesday, April 7, 2010

Learning to can meat

This post is mostly for my benefit. Something for me to refer to when I try to can meat again. I had so much fun this time!

Skip it or read it, but let me know in the comments if you have ever canned meat, if you would consider canning meat, or if you would NEVER can meat and why. So Wednesday at noon, I needed to have 7 quart jars ready to put in the pressure cooker at Laura R.'s house. (I had 5 packages from Sprouts to fill the 7 quart jars - but I needed 6 packages. LOTS OF CHICKEN!)
I started by
  • washing the jars in the dishwasher,
  • trimming the fat off the chicken, and
  • placing 3 breasts in each jar.
(I will mention here, that I also ran to Fry's grocery store for the new lids. Thank goodness for Fry's. Wal-mart only has them seasonal and 2 other stores didn't have canning lids. The lids need to be new to create a good seal when canning.)

Above is a picture of what I did before going to Laura's house.
  • Notice that I didn't cut off ALL the FAT. That is a big NO-NO!
  • Notice that the jars are not STUFFED to the BRIM with meat. That is a no-no, too!
At Laura's house - my very generous teacher, helped me re-trim the chicken and gave more more chicken to fill the cans to the brim. I OWE YOU 6 LARGE Sprouts chicken breasts. I won't forget. Thank you, oh wise one.
Then we re-boiled the lids for 3 minutes...
put 3/4 tsp of salt in each jar...
and wiped down the mouth of the jar where the seal and the jar touch. Gotta get that good and clean for a good seal.
Then Laura put about 3 inches of water in the pressure cooker. We placed the 7 quart jars (or 14 pint jars) in the pot. The water level was too high, so we took some out. Once the jars are in the pressure cooker the water should come up 3/4 of the way up the jar. Do not let the water level touch or cover the lids.

Laura, oh wise one, sealed the lid on the pot. She did this by lining up some arrows on the pot and turning it until it locked, then screwing the lid on evenly. There are 6 screws and she tightened them 2 at a time across from each other.

The pressure cooker is sealed and ready to cook. At this point...
  1. We turned the stove on HI.
  2. We waited for the pot to start "spitting". Let the pot "spit" for 5 minutes -
  3. THEN put the weight on the steam vent at 10 lbs. ( the weight is on the right in these pictures)
  4. ONCE the weight is on you need to let the gauge go from 0 to 10 pounds. The weight will shake!
  5. When the gauge reaches 10 pounds - SET the timer for 90 minutes (gauge is on the left).


The video is so you can HEAR what the pressure cooker sounds like for the next 90 minutes! While the pressure cooker is cooking, you need to stay home and "listen" for the sound in the video and WATCH the gauge. Keep the gauge between 10 - 15 pounds by adjusting your stove top heat - but mostly keep the gauge out of the CAUTION zone.
After 90 minutes - turn the heat off.

And wait...

for the pressure to go down to zero - again.
While we waited Sweetie
and RHM played with Heidi - Laura's dog. Such a good dog. Such a great wise teacher! Thanks, Laura!
After about 15 - 30 minutes, we took off the lid. HOT HOT BABY! Lots of steam.
Look at that! My raw chicken is cooked! This is going to be good, moist and shreds - perfect for casseroles, Mexican meals, or on my salads. YUM!

POST EDIT:
  • Pull out HOT jars, place on a towel
  • Let cool on counter top
  • WASH outside of jars
  • label lids with DATE



This process is one that I have seen lots, but it was fun to finally do it myself. I can't wait to get my own pressure cooker! Thanks Laura for the one on one lesson. I learned a lot! Hope I never forget!